Technical data:
Cutting edge ⌀ DC:2 mm
Coating:uncoated
Tool material:Solid carbide
Standard:DIN 6527
Type:W
Tolerance nominal ⌀:e8
No. of teeth Z:3
Helix angle:45 degrees
Helix angle characteristic:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.5×D for side milling
Shank:DIN 6535 HA to h6
Balance quality with shank:G 2.5 with HA
Through-coolant:no
Machining strategy:MTC
Flute length Lc:5 mm
Overhang length L1incl. recess:10 mm
Recess ⌀ D1:1.92 mm
Overall length L:57 mm
Shank ⌀ Ds:6 mm
Shank form:HA
Corner chamfer angle:90 degrees
Feed fzfor slot milling in short-chipping aluminium:0.006 mm
Feed fzfor side milling in short-chipping aluminium:0.009 mm
Colour ring:yellow
Type of product:End face mill
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.Without 45º corner chamfer.Without 45º corner chamfer.Size 1–2 – tolerance: Size nominal ⌀ DC = e8.Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 202002.