[“Manufacturer’s designation:Safe-Torque A 1”, ‘maximum torque:12 Nm
Direction of tightening:For right and left-hand tightening
Torque measuring accuracy:± 10 %
Test certificate:Manufacturer’s test certificate
Series:Safe-Torque
Overall length L:244 mm
Head width b:31.6 mm
Head height h:23.7 mm
Torque range:2 Nm – 12 Nm
Torque range:2 lbfft – 9 lbfft
Scale graduation, 1 graduation =:0.1 Nm
Weight:553 g
Square drive:1 4 inch
Display:analogue
Release signalling:acoustic; haptisk
Trigger principle:mechanical slip clutch
Connection format:Push-through square drive (ratchet)
Measurement technology:mechanical
Slipper function:yes
Quick release/ quick-change function:no
Memory pointer:no
Data can be recorded:no
Setting the trigger value:with adjustment scale
Feedback:triggering
Reversible reading:Nm; lbfft
Measurement process:Torque
Adjustable trigger value:adjustable
Standard:DIN EN ISO 6789
Type of product:Torque wrenches
Version:
The special slipping trigger mechanism reliably prevents unintentional overtightening. Desired torque value is easily set and saved as the user can hear and feel the device engage upon reaching the scale value. The 72 fine-pitched teeth enable a low return angle of only 5°.With 1/4 inch square drive.
Advantage:
Torque lock function: The torque function can be switched off – the tool can therefore also be used as a standard ratchet with high release torques and for applications involving defined rotational angles.
Function:
On reaching the set torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The overslip trigger mechanism ensures that the set torque values are not exceeded.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:l1 = Lever length without plug-in headl2 = Adjusted reference dimension on the torque wrenchl3 = Lever length including factory calibration reference dimensionl4 = Reference dimension of the plug-in headL = Total length of the toolT1 = Torque to be setT2 = Specified torque