Technical data:
maximum torque:100 Nm
Direction of tightening:For right and left-hand tightening
Torque measuring accuracy:±4 %
Exchangeable tool:Plug-in head
Series:MANOSKOP® 755
Overall length L:318 mm
Torque range:20 Nm – 100 Nm
Torque range:15 lbfft – 74 lbfft
Weight:640 g
Adjusted reference dimension on the torque wrench [l2]:17.5 mm
Socket for plug-in head:9×12 mm
Release signalling:akustisk; haptisk
Trigger principle:mechanical short-travel release
Connection format:for plug-in heads (rectangular socket)
Measurement technology:mechanical
Data can be recorded:no
Setting the trigger value:without setting scale (requires torque analyser)
Feedback:triggering
Reversible reading:Nm; lbfft
Measurement process:Torque
Adjustable trigger value:preset
Standard:DIN EN ISO 6789
Lever length without plug-in head [l1]:289 mm
Lever length including factory calibration reference dimension [l3]:306.5 mm
Type of product:Torque Wrench
Version:
Single-handed torque wrench without a setting scale. Wrench setting using torque analyser. Left-hand tightening by reversing the plug-in head.Without plug-in head (base model); see No. 657582 − 657590 for suitable plug-in heads.
Function:
On reaching the set torque value the wrench triggers giving a “signal”(audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in batch productions.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:l1 = Lever length without plug-in headl2 = Adjusted reference dimension on the torque wrenchl3 = Lever length including factory calibration reference dimensionl4 = Reference dimension of the plug-in headL = Total length of the toolT1 = Torque to be setT2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.