Technical data:
Series:Xcontrol
⌀ spring-mounted contact face:29 mm
Length:71.5 mm
Width:53 mm
Height:105 mm
minimum bore ⌀:0.3 mm
Measuring accuracy for length measurement:± 0.01 mm
Repetition accuracy for length measurement:± 0.005 mm
IP Index of Protection:IP 67
Power supply:Battery-powered
Type of product:Probes
Version:
XCONTROL – tactile tool contact point for tool breakage monitoring and tool length measurement. Measurement accuracy +/- 0.01 mm and repetition accuracy +/- 0.005 mm.Suitable only for Siemens and Heidenhain controllers.The machine requires a functioning USB port on the control panel.For use only in conjunction with the XCONNECT No. 359455 1.Dust-tight and watertight = IP67.Quick commissioning without hardware changeover and service engineer use.No need to interfere with the machine tool operating system!Drills from ⌀ 0.3 mm can be measured or tested.
Function:
IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
For tool breakage and process monitoring in an automated machine tool or for multi-machine operation.For tool length measurement and automatic transmission of data to a machine tool.Automatic transmission of the measured values into the machine control by GARANT Xconnect No. 359455 1.
Supplied with:
Supplied with battery CR2.
Optional extras:
XCONNECT data memory stick No. 359455 1, clamping claw No. 363081 80.
Note:
The item is permanently installed on a machine and can only be used on another machine through another cycle request.
Warning:
Bestimmungsgemäße Verwendung Nur in technisch einwandfreiem und betriebssicherem Zustand verwenden. Für den industriellen Gebrauch. Nur auf ebenen und sauberem Untergrund verwenden Nur bei ordnungsgemäßer Montage und voll funktionsfähigen Sicherheits- und Schutzvorrichtungen der Maschine verwenden. Nur originale Ersatz- und Verschleißteile verwenden. Sachwidriger Einsatz Nicht in explosionsgefährdeten Bereichen verwenden. Nicht in Bereichen mit hohem Staubanteil, brennbaren Gasen, Dämpfen oder Lösungsmitteln verwenden. Keinen Schlägen, Stößen oder schweren Lasten aussetzen. Keine eigenmächtigen Umbauten tätigen.