Technical data:
Drawer runner extension (partial/full extension):100 %
Drawer runner extension:Anti-tilt lock
Square drive:1 2 inch; 1 4 inch
Cylinder lock:modular barrel
Height:1,045 mm
Width:1,150 mm
Depth:500 mm
Type of product:Roller cabinet
Version:
Mobile workbench WB 621 with 7 drawers. The 2 upper drawers are equipped with a 137-piece Stahlwille tool set, consisting of the following configuration: Spanners, pliers, 1/4-inch and 1/2-inch sockets, striking tools, circlip pliers, screwdrivers and supplementary articles. The contents of the other 5 drawers can be individually selected.The cabinet section has a height-adjustable storage shelf. The cabinet section and workbench are locked with a common key. 4 keys are supplied.The general-purpose tool selection fits precisely in two-tone PE rigid foam inlays, in which each tool has its own defined place in the workbench. The drawers in the roller cabinet are unlocked using a central locking mechanism with a cylinder lock on the side and a removable key. The workbench has a large work surface with birch marine ply worktop, FSC certified, 1150×500×30 mm. Can be wired using two rubberised feed-throughs and removable cable duct on the rear. With paper roll holder and side hole grid for hooks, e.g. for larger tools. The oil-resistant and acid-resistant wheels (⌀ 125 mm) have fibre shields to protect the bearings against dirt and fibres/threads, with two parking brakes.
Supplied with:
Workbench: 1 pc. WB 621Spanner set, 22 pieces: 1 pc. each combination spanner No. 613500 size 6; 7; 8; 10; 11; 12;13; 14; 15; 16; 17; 18; 19; 21; 22; 245 pcs. ratchet ring spanner size 8, 10; 13; 17; 19 mm1 pc. single open ended spanner, max. width across flats 34 mmPliers set, 4 pieces: 1 pc. water pump pliers size 240 mm1 pc. heavy-duty side cutter size 160 mm1 pc. snipe nose pliers size 200 mm1 pc. combination pliers size 180 mmSocket set, 72 pieces: 1/4 inch + 1/2 inch socket set, 52 pieces1 pc. bit set with 1 pc. screwdriver holder, 21 piecesStriking tool set, 7 pieces: 1 pc. engineer’s hammer size 500 g1 pc. soft-faced hammer size 35 mm1 pc. flat chisel size 175 mm2 pcs. pin punch size 150×6 mm; 3.4 mm1 pc. drift punch size 120×4 mm1 pc. centre punch size 100×10 mmCirclip pliers set, 4 pieces: 4 pcs. size A21; A2; J2; J21Screwdriver set + supplementary articles, 28 pieces: 3 pcs. screwdriver for slot-head size 2.5; 4; 10 mm3 pcs. screwdriver for Phillips size PH1; PH2; PH31 pc. L-wrench set for internal Torx®, 8 pcs.1 pc. hexagon key L-wrench set, 9 pcs.1 pc. cable knife1 pc. tape measure size 3 m1 pc. wooden folding rule size 2 m1 pc. mini magnetic retriever1 pc. rod lamp
Note:
Tools are supplied loose.