Technical data:
maximum torque:30 Nm
Direction of tightening:For right and left-hand tightening
Torque measuring accuracy:±2 %; ±3 %
Exchangeable tool:Plug-in head
Test certificate:Manufacturer’s test certificate
Overall length L:390 mm
Torque range:6 Nm – 30 Nm
Resolution:0.01 Nm
Weight:1,400 g
Adjusted reference dimension on the torque wrench [l2]:17.5 mm
Square drive:1 4 inch
Socket for plug-in head:9×12 mm
Display:digital
Release signalling:optisk; akustisk
Trigger principle:mechanical short-travel release
Power supply:Battery-powered
Number of batteries contained:1
Battery type:LR3
Connection format:for plug-in heads (rectangular socket)
Measurement technology:electronic
Data can be recorded:yes
Setting the trigger value:digital, adjustable
Feedback:displaying
Reversible reading:Nm; lbfft; lbfin; kgfm
Measurement process:Torque
Adjustable trigger value:adjustable
Standard:DIN EN ISO 6789
Lever length without plug-in head [l1]:299.2 mm
Lever length including factory calibration reference dimension [l3]:316.7 mm
Type of product:Torque Wrench
Version:
Robust torque wrench with impact resistant casing, 2-component handle, large display and reversible ratchet. Easy operation using large input buttons. Visual and acoustic signal indicates achievement of the set torque visually and audibly. Two working modes; selectable between peak value display and following display. The working memory can store up to 50 torque settings.Units of measure: Nm, lbfft, lbfin, kgfm.
Sturdy plug-in ratchet with change-over wheel.
Application:
Torque control; controlled tightening of screws in a single operation or for small batch production.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting data:
Legend for drawing and formula:l1 = Lever length without plug-in headl2 = Adjusted reference dimension on the torque wrenchl3 = Lever length including factory calibration reference dimensionl4 = Reference dimension of the plug-in headL = Total length of the toolT1 = Torque to be setT2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.