Technical data:
Standard:DIN 863
Measuring range:20 mm – 25 mm
Scale divisions:0.001 mm
Reversible reading:mm inch
Error limit:0.004 mm
Dimension a:0.5 mm
Standard measuring depth:68 mm
Measuring depth with extension:218 mm
Interface:RS232C interface; USB interface; Digimatic interface
IP Index of Protection:IP 52
Measured value saving:MAHR reference-lock system
Measurement technology:digital
Packaging:sturdy box
Power supply:Battery-powered
Number of batteries contained:1
Article no of the battery / rechargeable battery fitted:081560 CR2032
Type of product:3-point internal micrometer
Version:
Simple direct reading on the high-contrast display. Immediately ready for use due to the Reference System. The REFERENCE measuring system saves and retains the set zero position, even after being switched on again. The lock function prevents measurement errors arising from accidentally touching the control buttons. Button for changeover between relative and absolute measurement. Screw-on measuring heads can easily be changed. Self-centring micrometer head from 12mm with carbide measuring jaws. From 40mm the micrometer head is of aluminium, to save weight. From 12mm for measuring down to the bottom of the hole.
Function:
IP52: Protected against splashed water from directions up to 15° (dripping water) and protected against penetration of dust into the inside (protected against dust), also completely protected against touching.
Supplied with:
1 battery No. 081560 size CR2032
Optional extras:
Extension No. 428950, data cable No. 498940, setting rings No. 484030.