Technical data:
Width:210 mm
Depth:175 mm
Height:260 mm
for bending height up to:100 mm
Weight including accessories:24 kg
Type of product:Bending machine
Version:
Equipment of unbreakable spheroidal graphite iron with eccentric quick clamping for cold bending and hot bending flat, round and rectangular steel bar to high accuracy – for continuous use to professional standards. Suitable for bending and cranking to particularly tight radii.
Application:
For accurate hot and cold bending (bending angles 0 −120°) of flat, round and square material. For producing sharp bends or rounded bends in various radii. Length stop and angle stop for ease of setting.Maximum bending performance:(reduced) with bending plates No. 823652 / 823653 within the upper hollowed area of the jaw:− Steel flat, hot, up to 50×6 mm or 20×15 mm;− Steel flat, cold, up to 50×4 mm or 20×10 mm;− Round and square steel bar, cold, up to 16 mm.(normal) with bending plates No. 823652 / 823653 within the lower non-hollowed area of jaw:− Steel flat, hot, up to 100×12 mm or 60×20 mm;− Steel flat, cold, up to 100×6 mm or 50×12 mm;− Round and square steel bar, hot, up to 30 mm;− Round and square steel bar, cold, up to 18 mm.(maximum) with bending plates No. 823654 / 823655 (special accessory):− Steel angle section, hot, (straight) up to 100×12 mm;− Steel angle section, cold, (straight) up to 60×8 mm;− Copper strip up to 100×12 mm;− Stainless steel up to 50×8 mm.
Supplied with:
Angle bender including:1 clamping box with eccentric clamping,1 bending plate sharp-edged (for material up to 2 mm) No. 823652,1 normal bending plate (r = 4 mm) No. 823653, 1 pressure pad1 length stop 440 mm,1 angle stop.
Note:
Further bending plates can be found under No. 823651 − 823657.