Technical data:
Cutting edge ⌀ DC:8 mm
Coating:TiAlN
Tool material:Solid carbide
Standard:DIN 6527
Type:H
Tolerance nominal ⌀:h10
No. of teeth Z:6
Helix angle:50 degrees
Direction of infeed:horizontal and oblique
Cutting width aefor milling operation:0.05×D for side milling
Shank:DIN 6535 HA to h6
Through-coolant:no
Flute length Lc:19 mm
Overall length L:63 mm
Shank ⌀ Ds:8 mm
Corner chamfer angle:90 degrees
Feed fzfor side milling in steel < 55 HRC:0.03 mm Colour ring:red Type of product:End face mill Version: Strengthened core and geometry for hard machining, without dynamic helical pitch. Application: For profile milling as finishing.(Plunge cutting only to shallow depths).