Technical data:
Cutting edge ⌀ DC:4 mm
Coating:DLC
Tool material:Solid carbide
Standard:DIN 6527
Type:W
Tolerance nominal ⌀:h6
No. of teeth Z:3
Helix angle:45 degrees
Helix angle characteristic:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.5×D for side milling
Shank:DIN 6535 HA to h6
Balance quality with shank:G 2.5 with HA
Through-coolant:no
Machining strategy:MTC
Flute length Lc:11 mm
Overhang length L1incl. recess:17 mm
Recess ⌀ D1:3.7 mm
Overall length L:57 mm
Shank ⌀ Ds:6 mm
Shank form:HA
Corner chamfer width at 45°:0.1 mm
Corner chamfer angle:45 degrees
Feed fzfor slot milling in short-chipping aluminium:0.015 mm
Feed fzfor side milling in short-chipping aluminium:0.02 mm
Colour ring:yellow
Type of product:End face mill
Version:
With the latest generation of DLC coating sp2.Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE!Recommended successor products are No. 202004 and No. 202010.