Technical data:
Series:Diabolo
Cutting edge ⌀ DC:2 mm
Coating:TiAlN
Tool material:Solid carbide
Standard:Manufacturer’s standard
Type:H
Tolerance nominal ⌀:0 −0,005
No. of teeth Z:2
Helix angle:30 degrees
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:0.05×D for copy milling
Shank:DIN 6535 HA to h5
Through-coolant:no
Flute length Lc:1.6 mm
Corner radius R1:1 mm
Overhang length L1incl. recess:25 mm
Recess ⌀ D1:1.94 mm
Overall length L:60 mm
Shank ⌀ Ds:4 mm
Feed fzfor copy milling in steel < 65 HRC:0.025 mm Correction factor ap corr:0.35 Colour ring:red Type of product:Ball-nosed slot drill Version: GARANT Diabolo:Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper.Tolerances:Corner radius: Radius contour = 0 / -0.005 mm.Neck ⌀: D1 = 0 / -0.01 mm.Recess angle α = 16°. Note: At greater tool overhang lengths, use a reduced value for ap!values for:copying: ap = 0.05×D×ap korrTo calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z