Technical data:
Cutting edge ⌀ DC:1 mm
Coating:DLC
Tool material:Solid carbide
Standard:Manufacturer’s standard
Type:W
Tolerance nominal ⌀:0 −0.005
No. of teeth Z:2
Helix angle:30 degrees
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:0.05×D for copy milling
Shank:DIN 6535 HA to h5
Through-coolant:no
Flute length Lc:0.8 mm
Corner radius R1:0.5 mm
Overhang length L1incl. recess:3 mm
Recess ⌀ D1:0.96 mm
Overall length L:45 mm
Shank ⌀ Ds:4 mm
Feed fzfor copy milling in cast aluminium:0.03 mm
Correction factor ap corr:1
Colour ring:yellow
Type of product:Ball-nosed slot drill
Version:
With advanced DLC sp2 coating. For the highest demands regarding performance and precision in aluminium materials. Extremely tight tolerances ensure maximum accuracy. Double-relief ground with 2 chamfers hollow ground.Tolerances:Corner radius: Radius contour = 0 / -0.005 mm.Neck ⌀: D1 = 0 / -0.01 mm.Recess angle α = 16°.
Note:
At greater tool overhang lengths, use a reduced value for ap!values for:copying: ap = 0.25×D×ap korrTo calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.