Technical data:
Series:Master Steel
Cutting edge ⌀ DC:12 mm
Coating:TiAlN
Tool material:Solid carbide
Standard:DIN 6527
Milling profile:NR
Tolerance nominal ⌀:d11
No. of teeth Z:5
Helix angle:42 degrees
Spacing of the cutters:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.5×D for side milling
Shank:DIN 6535 HB to h6
Through-coolant:no
Machining strategy:HPC
Flute length Lc:26 mm
Overhang length L1incl. recess:36 mm
Recess ⌀ D1:11.1 mm
Overall length L:83 mm
Shank ⌀ Ds:12 mm
Corner chamfer width at 45°:0.6 mm
Corner chamfer angle:45 degrees
Feed fzfor slot milling in steel < 900xa0N/mm2:0.065 mm Feed fzfor side milling in steel < 900xa0N/mm2:0.09 mm Colour ring:green Type of product:End face mill Version: With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.Feed rate per tooth up to 0.1xa0mm up to a depth of 2×D (in the slot milled from solid). Advantage: The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face. Application: For roughing machining, particularly suitable for full-slot machining.