Technical data:
Cutting edge ⌀ DC:12 mm
Coating:TiXSi
Tool material:Solid carbide
Standard:DIN 6527
Type:N
Tolerance nominal ⌀:f8
No. of teeth Z:4
Helix angle:38 degrees
Helix angle characteristic:unequal spacing
Spacing of the cutters:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.5×D for side milling
Shank:DIN 6535 HB to h6
Through-coolant:no
Machining strategy:HPC
Flute length Lc:16 mm
Overall length L:73 mm
Shank ⌀ Ds:12 mm
Corner chamfer width at 45°:0.3 mm
Corner chamfer angle:45 degrees
Feed fzfor slot milling in steel < 900xa0N/mm2:0.07 mm Feed fzfor side milling in steel < 900xa0N/mm2:0.09 mm Colour ring:green Type of product:End face mill Version: For roughing and finishing.Up to 1×D into solid material at very high feed rates with smooth cutting action.At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)! Advantage: Optimised flute form, eccentric relief ground, wide chip space.