Technical data:
Cutting edge ⌀ DC:8 mm
Coating:TiAlN
Tool material:Solid carbide
Standard:Manufacturer’s standard
Type:H
Tolerance nominal ⌀:f8
No. of teeth Z:4
Helix angle:45 degrees
Helix angle characteristic:unequal spacing
Spacing of the cutters:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.15×D for side milling; 0.1×D
Shank:DIN 6535 HA to h6
Through-coolant:no
Machining strategy:MTC; TPC
Flute length Lc:21 mm
Overhang length L1incl. recess:25 mm
Recess ⌀ D1:7.4 mm
Overall length L:63 mm
Shank ⌀ Ds:8 mm
Corner rounding rv:0.2 mm
Feed fzfor slot milling in steel < 60 HRC:0.02 mm Feed fzfor side milling in steel < 60 HRC:0.025 mm Colour ring:red Type of product:End face mill Version: Significant cutting force reduction due to 45° helix. Application: Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres. Note: For materials > 55 HRC we recommend reducing the depth of cut to ap =0.25×D…0.5×D.