Technical data:
maximum torque:6 Nm
Direction of tightening:For right and left-hand tightening
Torque measuring accuracy:±4 %
Test certificate:Manufacturer’s test certificate
Overall length L:225 mm
Torque range:1 Nm – 6 Nm
Scale graduation, 1 graduation =:0.1 Nm
Weight:300 g
Square drive:1 4 inch
Display:analogue
Release signalling:akustisk; haptisk
Trigger principle:mechanical short-travel release
Connection format:Push-through square drive (ratchet)
Measurement technology:mechanical
Data can be recorded:no
Setting the trigger value:with adjustment scale
Feedback:triggering
Reversible reading:Nm
Measurement process:Torque
Adjustable trigger value:adjustable
Standard:DIN EN ISO 6789
Lever length including factory calibration reference dimension [l3]:155 mm
Type of product:Torque Wrench
Version:
Handy and very compact single-arm torque wrench, adjustable by scale and self-triggering. Extremely high repeat accuracy, since high quality materials are used throughout. Wearing parts, such as compression springs, are specially pre-treated and sorted. Reversible ratchet for left-hand and right-hand tightening.Acoustic and perceptible “click effect” ensures particularly easy use and accurate setting of the desired torque.With built-in reversible ratchet with ejector − for left-hand and right-hand tightening.Units of measure: Nm
Function:
The wrench triggers giving a “signal” (clearly audible acoustic tone and noticeable vibration) and afterwards is immediately ready for use again.
Application:
For medium to larger batch productions.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Of the displayed value only for right-hand tightening: ±4 %
Cutting data:
Legend for drawing and formula:l1 = Lever length without plug-in headl2 = Adjusted reference dimension on the torque wrenchl3 = Lever length including factory calibration reference dimensionl4 = Reference dimension of the plug-in headL = Total length of the toolT1 = Torque to be setT2 = Specified torque
Note:
Calibration is only possible for right-hand tightening.The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.