Technical data:
Cutting edge ⌀ DC:5 mm
Coating:ZOX
Tool material:Solid carbide
Standard:Manufacturer’s standard
Type:W
Tolerance nominal ⌀:f8
No. of teeth Z:3
Helix angle:45 degrees
Helix angle characteristic:unequal spacing
Spacing of the cutters:unequal spacing
Direction of infeed:horizontal, oblique and vertical
Cutting width aefor milling operation:Full slot cutting depth 1×D; 0.5×D for side milling
Shank:DIN 6535 HA to h6
Balance quality with shank:G 2.5 with HA
Through-coolant:no
Machining strategy:HPC
Flute length Lc:13 mm
Overhang length L1incl. recess:18 mm
Recess ⌀ D1:4.7 mm
Overall length L:57 mm
Shank ⌀ Ds:6 mm
Shank form:HA
Corner chamfer width at 45°:0.1 mm
Corner chamfer angle:45 degrees
Feed fzfor slot milling in short-chipping aluminium:0.06 mm
Feed fzfor side milling in short-chipping aluminium:0.08 mm
Colour ring:yellow
Type of product:End face mill
Version:
Sturdy roughing end mill without knuckle profile. With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Note:
NEW GENERATION AVAILABLE!Recommended successor product is No. 202004.